About
USA Branch
CONNECT WITH US
Copyright © 2019 Shenzhen Donview Electronic Technology Co., Ltd | All Rights Reserved. ICP : 11036670号 Powered by www.300.cn
Page view：
Short Focal Projector Wall Bracket
Detail
Spec Sheet
副标题
Short focal Projector Wall Bracket
Metope Installation Diagram
1.The suitable installation size Range For The Picture is:70’-100’
2. The following data is installed the metope setup tray of the wall bracket and the projection screen at the same level
3. Please Pay attention to installation the metope setup tray of the wall bracket to the center of the projector bottom setup tray
4.Please install it according to the Projector specifications and the Projection distance data in the Propagating color page
5.All the data only for reference , please adjust according to the actual installation conditions
Three possible methods of installation (According to the projector lens relative position)
Installation diagram one (projector Lens leans on the left)
Installation diagram two (projector Lens leans on the right)
Installation plan three (projector Lens sets in the center )
picture 4:The size schematic for the Fixed base on the wall
According to the pictures and the lifting & positioning instruction of the projector specifications, locate four Screw holes on the wall.
picture 5: Installation steps
Line : (generally is for power line , VGA cable , video cable , control line and so on )
1．Thread the projector connecting line through the inferolateral channel of the Wall support bar
2．Fix the Wall support bar to the four Screw holes and , generally using the M8 Expansion screws
3． Insert the plastic decorative cover to the bottom of the wall support aluminum bar
4． Connect the projector to the lifting adjusting bracket on the wall with corresponding screws
5． Fix the lifting adjusting bracket connected with the projector to the Wall support bar by the stuck through.
6．seal the plastic plug
the Schematic diagram for projector adjusting
Packing List
|
parts name |
quantity |
remark |
|
aluminum Wall support bar |
1PCS |
Fixed together with the Steel base |
|
the plastic Decorative cover |
1PCS |
certificate |
|
lifting adjusting bracket |
1PCS |
|
|
plastic plug |
1PCS |
|
|
glue strip |
1PCS |
|
|
the screws toolkit |
1PCS |
including the Hexagon wrench and screws |
|
specifications |
1PCS |
|
Previous article
无
Mobile Stand
Next article